|
|
| Step 1. Begin assembly of your BMP-2 by glueing the right-hand side tracks to the hull. |
Step 2. Repeat for the left-hand side. |
 |
 |
 |
| Below: Both tracks in place. |
Step 3. Next, attach the back plate to the rear of the hull. |
 |
 |
 |
Step 4. Glue the top hull piece to the lower assembly.
|
Step 5. Combine the top and bottom turret pieces. |
 |
 |
 |
| Below: Constructed turret. |
Step 6. Attach the main gun to the turret. |
 |
 |
 |
Step 7. Glue the search light in place next to the main gun.
|
Step 8. Your choice of cupola can then be glued in. |
 |
 |
 |
| Below: Open cupola in place. |
Step 9. With the open cupola selected, a commander can then be glued in. |
 |
 |
 |
| Step 10. Next, attach the smoke dischargers to the outside of the turret. |
Step 11. Mount the missile launcher to the top of the turret. |
 |
 |
 |
| Below: Missile launcher in position. |
Step 12. Next, glue in the turret peg. |
 |
 |
|
Alternatively, you may prefer to glue rare earth magnets into the recess in the hull and to the bottom of the turret. Magnets are a quick and secure way of fixing your turrets to the hulls, but they are a small added expense, which is why the turret peg is provided, leaving the choice up to you.
Rare Earth Magnets (XX105) are available through the online store here...
These 1mm x 5mm magnets fit perfectly into the round spaces in the hull and turret.
|
 |
| Below: Turret peg gluded in place. |
Step 13. Posititon the turret on top of the hull assembly. |
 |
 |
| Below: Fully assembled BMP-2 transport. |
 |
| Step 1. Begin assembly of your BMP-1 by glueing the right-hand side tracks to the hull. |
Step 2. Repeat for the left-hand side. |
|
|
|
| Below: Both tracks in place. |
Step 3. Next, attach the back plate to the rear of the hull. |
|
|
|
| Step 4. Glue the top hull piece to the lower assembly. |
Step 5. Combine the top and bottom turret pieces. |
 |
 |
 |
| Below: Constructed turret. |
Step 6. Attach the main gun to the turret. |
 |
 |
 |
Step 7. Mount the missile to the tp of the main gun.
|
Step 8. Next, glue in your choice of hatch. |
 |
 |
 |
| Below: Open hatch in position. |
Step 9. With the open hatch selected, a commander can be glued in place. |
 |
 |
 |
| Step 10. Glue in the turret peg. |
Step 11. Mount the turret on top of the hull assembly. |
 |
 |
 |
|
Alternatively, you may prefer to glue rare earth magnets into the recess in the hull and to the bottom of the turret. Magnets are a quick and secure way of fixing your turrets to the hulls, but they are a small added expense, which is why the turret peg is provided, leaving the choice up to you.
Rare Earth Magnets (XX105) are available through the online store here...
These 1mm x 5mm magnets fit perfectly into the round spaces in the hull and turret.
|
|
| Below: Fully assembled BMP-1 transport. |
 |
|
|
|
 |
|