T-64 Assembly (TSBX13)

T-64 Assembly Guide (TSBX13)

Assembly guide on how to assemble your T-64 Tanks.

Check out the Yuri's Wolves spotlight here...
Go to the T-64 Platoon spotlight here...

T-64 Assembly (TSBX13)

Step 1. Begin assembly of your T-64 by glueing the top and bottom hull pieces together. Step 2. Next, glue on the back plate.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Below: The back plate in place. Step 3. Attach the fuel tanks to the rear of the hull top.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Step 4. Glue the left-hand side tracks on to the lower hull.
Step 5. Repeat for the right-hand side.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Below: Right-hand side tracks in place. Step 6. Attach the left-hand side skirt to the outside of the tracks.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Step 7. Repeat for the right-hand side.
Step 8. Attach the de-bogging beam to the back of the hull assembly.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Below: De-bogging beam in position. Step 9. Next, glue the turret top and bottom together. 
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Step 10. Glue the main gun to the front of the turret. Step 11. Mount the stowage bin on the back of the turret.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Below: Stowage bin in place. Step 12. Next, glue the snorkel on top of the stowage bin.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Step 13. Attach the smoke dischargers to the front of the turret. Step 14. Glue in your choice of cupola.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Step 15. With the open cupola in place a commander can be fitted. Below: Commander in place.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Step 16. The commanders MG then attaches to the front of the cupola. Step 17. Attach the turret peg. 
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)

Alternatively, you may prefer to glue rare earth magnets into the recess in the hull and to the bottom of the turret. Magnets are a quick and secure way of fixing your turrets to the hulls, but they are a small added expense, which is why the turret peg is provided, leaving the choice up to you.

Rare Earth Magnets (XX105) are available through the online store here...

These 1mm x 5mm magnets fit perfectly into the round spaces in the hull and turret.

Rare Earth Magnets (XX105)
Below: Turret peg in place. Step 18. Fit the turret on top of the hull to complete construction.
T-64 Assembly (TSBX13) T-64 Assembly (TSBX13)
Below: Fully assembled T-64 tank.
T-64 Assembly (TSBX13)

 
Facebook Twitter Instagram
Flames Of War
Useful Team Yankee Downloads
Iron Maiden Landing Page
Leopard Landing Page
Launch Weekends