Magach 6 Assembly (TUBX11) How to assemble your Magach 6 tanks. Check out the Magach 6 Tank Platoon spotlight here...

Assembling The Plastic Magach 6

Step 1: Start by gluing the right-hand tracks to the lower hull section.

Step 2. Attach the left-hand side tracks to the hull.

Step 3. Affix the hull top to the hull bottom.

Step 4. Attach the backplate to the hull assembly.

Step 5. Next, attach the back plate to the back of the tank.

Step 6. Next, attach the top plate of the turret to the bottom section

Step 7. Next, assemble the equipment rack

Step 8. Next, attach the equipment rack to the back of the turret.

Step 9. Next, attach the front plate to the front of the turret.

Step 10. Next, attach the 105mm main gun to the front of the turret. Note that the Magach 6 only uses the A1 Barrel.

Step 11. Next, attach the 50. cal machine gun to the top of the front plate		Step 12. place the cupola of your choice on top of the turret.

Step 12b. If you have chosen the open cupola glue a comander of your choice in place	Step 13. Attach the machine gun to the cupola in the location shown. Note the slot where you place mount.

Adding Rare Earth Magnets You may choose to glue rare earth magnets into the recess in the hull and to the bottom of the turret. Magnets are a quick and secure way of fixing your turrets to the hulls, as an alternative to the included plastic peg. Rare Earth Magnets (XX105) are available through the online store here...

Read Chris' guide to Rare Earth Magnets here for more tips and tricks...

Below: With the turret now secured to the hull, the M60 is now fully assembled.