|
|
|
Skyhawk Assembly (TIBX08)
Step 1. Glue the nose cone on to the body. |
Below: The nose cone attached correctly. |
|
|
Step 2. Attach the optional Napalm bombs to the inner wing pylons. |
Below: The Naplam bombs in position. |
|
|
Step 3. Next, attach the CBU-100 Cluster bombs to the outer wing pylons. |
|
|
Assembling The Flight Stand |
Step One Cut the parts of the flight stand off the plastic sprue using a sharp hobby knife or a pair of hobby cutters. |
|
Step Two Attach the stem to the flight stand base. The hard plastic of the flight stand will bond firmly with plastic cement, but you can also use superglue.
There are two sizes of stem; the standard practice is to use the shorter stem for helicopters and the tall stem for strike aircraft, to bolster the impression that they are flying at a higher altitude. But there's no reason you shouldn't use the tall stem for helicopters if you like how it looks.
Left: The stem attached to the base.
|
Step Three Add the magnet cap to the top of the stem. The cap fits snugly to the top of the stem, so you will only need a small amount of glue to neatly secure the magnet cap in place.
|
Step Four The cap has a recess to hold one of the supplied rare-earth magnets, to create a solid connection between the stand and the aircraft model. The tabs at the front and back help keep the aircraft pointing in the right direction. |
|
|
Step Five The bottom of the aircraft has a recess for a magnet and slots to match with the tabs on the cap. |
Step Six A second magnet is the glued into the recess, making sure the polarities match. |
Step Seven Mated perfectly, the flight stand, aircraft and magnets create a solid, stable connection. |
Below: An assembled Skyhawk. |
|
Last Updated On Thursday, April 18, 2019 by Luke at Battlefront
|
|
|