AMX-10P Assembly (TFBX02)

AMX-10P Assembly (TFBX02)

How to assemble your AMX-10P APCs.

Check out the AMX-10P Platoon spotlight here...

AMX-10P Assembly (TFBX02)
Assembling the AMX-10P
Step 1. Start by gluing the right-hand side tracks to the lower hull piece. Step 2. Repeat for the left-hand side.
AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02)
Below: Both tracks attached. Step 3. Complete the hull by adding the top plate.
AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02)
Below: The box contains optional mudguards and a choice of commanders hatches.
AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02)
Step 4. Attach your chosen hatch to the main turret piece. Step 5. Glue the cannon MG to its mount.
AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02)
Below: MG mounted. Step 6. Add the gun assembly to the turret.
AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02)
Step 8. Finish assembly by adding a peg to to the turret and positioning it on the hull.
AMX-10P Assembly (TFBX02) AMX-10P Assembly (TFBX02)

Alternatively, you may prefer to glue rare earth magnets into the recess in the hull and to the bottom of the turret. Magnets are a quick and secure way of fixing your turrets to the hulls, but they are a small added expense, which is why the turret peg is provided, leaving the choice up to you.

Rare Earth Magnets (XX105) are available through the online store here...

These 1mm x 5mm magnets fit perfectly into the round spaces in the hull and turret.

Rare Earth Magnets (XX105)
Below: A completed AMX-10P APC.
AMX-10P Assembly (TFBX02)


Last Updated On Wednesday, July 25, 2018 by Chris at Battlefront